What will be your first mod?

Shaggy

Administrator
Staff member
Admin
Joined
Oct 30, 2021
Messages
849
Reaction score
243
Location
Arizona
I’ve seen a couple of winch mods that interferes with the camera view. I hope to avoid that. Way and see approach for now.

Which ones have you seen and they have been for the Bronco?
 

Spaulding

New member
Joined
May 9, 2022
Messages
18
Reaction score
7
Location
Indiana
This may sound strange, but I would put a wrap on it immediately. my plan is to take it off-roading as soon as I get it and I know scratches are impossible to avoid. will be an xtra cost but want to be able to have the oringal paint with little or no damages after I'm done with it. don't know what color I would wrap it though. other mods would be tube doors, tuning and go old school with a cb radio. will have more planned but that is my initial
 

BroncoGo!

Member
Joined
May 10, 2022
Messages
69
Reaction score
37
Location
Way Out West
I am not familiar with those. Interested to see what they are

Warn has developed some accessories specifically for the 6G Bronco those being two different front bumpers and a rear bumper.

Warn Accessories - 6G Bronco

If you add one of those bumpers you will be able to mount almost any suitable Warn winch you want.

Warn Industries was founded in 1948 by Arthur Warn in Clackamas Oregon and they have been producing vehicle recovery equipment and offroad vehicles accessories ever since.
 

Spaulding

New member
Joined
May 9, 2022
Messages
18
Reaction score
7
Location
Indiana
Warn has developed some accessories specifically for the 6G Bronco those being two different front bumpers and a rear bumper.

Warn Accessories - 6G Bronco

If you add one of those bumpers you will be able to mount almost any suitable Warn winch you want.

Warn Industries was founded in 1948 by Arthur Warn in Clackamas Oregon and they have been producing vehicle recovery equipment and offroad vehicles accessories ever since.
Ahh, I knew what those were but didn't know the name of them. Thanks for the info
 

BroncoGo!

Member
Joined
May 10, 2022
Messages
69
Reaction score
37
Location
Way Out West
Tunes are nice but traditionally you have to wait a year or so for the aftermarket to develop one.

I'd be looking at what came on the Bronco Raptor then either add or update accessories to fit my planned use much as I did with my Wrangler.
 

Spaulding

New member
Joined
May 9, 2022
Messages
18
Reaction score
7
Location
Indiana
Tunes are nice but traditionally you have to wait a year or so for the aftermarket to develop one.

I'd be looking at what came on the Bronco Raptor then either add or update accessories to fit my planned use much as I did with my Wrangler.
What aftermarket did you do to your Wrangler?
 

BroncoGo!

Member
Joined
May 10, 2022
Messages
69
Reaction score
37
Location
Way Out West
What aftermarket did you do to your Wrangler?

A LOT! The acronym Jeep stands for Just Empty Every Pocket

Here is the mod list as of today:

A-Tach JL Holster Mount​
QuadraTec Flashlight Mount​
Toyo AT II 285/75R17 Tires​
QuadraTec Dead Pedal​
CravenSpeed Shorty Antenna​
Front seat tilt kit - Desert DoesIt​
eBay seat side storage​
Easy Start Stop module​
MOPAR Cargo mat kit​
Tint, 30% Front & sides, Limo on rear​
GPCA M8 interior tie-down D-rings​
Garmin InReach Mini​
RockSlide Engineering - RotoPax Mount​
MOPAR F & R grab handles​
onX Map App for Android Tablet​
Bartact 2.5lb fire extinguisher & mount​
Hooke Road Cargo shelt​
RotoPax WaterPak & Fuel Pak w/mounts​
Factor 55 flat link winch hook​
Redline Tuning hood strut kit​
Staun tire deflators​
Tint​
55% ceramic inside windshield, 5% limo on rear window, 35% side windows​
67 Designs JL Rail Mount Series 55 Base #P11194 with 3 balls​
Joby JBO1394-BWW tablet mount​
67 Designs carbon fiber arms​
67 Designs camera mount​
Rough Country #10612c Roof Rack w/lights​
Rough Country #10596 Front Winch Bumper​
Rough Country #10598 Rear bumper with tire carrier​
Rough Country Pro12000S winch​
Rough Country #66830 3.5" lift​
Borla #140822 "Climber" catback exhaust​
Westin #42-6025 Triple tube rock rail/step assembly set​
GoRhino #701001T Hi-Lift jack mount​
Jeep XR Flare Extensions​
Bora Wheel Spacers, 5 x 127mm, hub centric, 1"​
 
Last edited:

Spaulding

New member
Joined
May 9, 2022
Messages
18
Reaction score
7
Location
Indiana
A LOT! The acronym Jeep stands for Just Empty Every Pocket

Here is the mod list as of today:

A-Tach JL Holster Mount​
QuadraTec Flashlight Mount​
Toyo AT II 285/75R17 Tires​
QuadraTec Dead Pedal​
CravenSpeed Shorty Antenna​
Front seat tilt kit - Desert DoesIt​
eBay seat side storage​
Easy Start Stop module​
MOPAR Cargo mat kit​
Tint, 30% Front & sides, Limo on rear​
GPCA M8 interior tie-down D-rings​
Garmin InReach Mini​
RockSlide Engineering - RotoPax Mount​
MOPAR F & R grab handles​
onX Map App for Android Tablet​
Bartact 2.5lb fire extinguisher & mount​
Hooke Road Cargo shelt​
RotoPax WaterPak & Fuel Pak w/mounts​
Factor 55 flat link winch hook​
Redline Tuning hood strut kit​
Staun tire deflators​
Tint​
55% ceramic inside windshield, 5% limo on rear window, 35% side windows​
67 Designs JL Rail Mount Series 55 Base #P11194 with 3 balls​
Joby JBO1394-BWW tablet mount​
67 Designs carbon fiber arms​
67 Designs camera mount​
Rough Country #10612c Roof Rack w/lights​
Rough Country #10596 Front Winch Bumper​
Rough Country #10598 Rear bumper with tire carrier​
Rough Country Pro12000S winch​
Rough Country #66830 3.5" lift​
Borla #140822 "Climber" catback exhaust​
Westin #42-6025 Triple tube rock rail/step assembly set​
GoRhino #701001T Hi-Lift jack mount​
Jeep XR Flare Extensions​
Bora Wheel Spacers, 5 x 127mm, hub centric, 1"​
DAMN! That's funny on the JEEP acronym. Rock crawl?
 

caljae1

New member
Joined
Jan 27, 2023
Messages
9
Reaction score
6
Location
Roseville, CA
I'm not planning on it. If you are going to use them, put them on for sure!
Is anyone planning on making it any taller by adding the factory roof bars?
Going with the short rack and side accessory panels from BadAss Tents. I’ve seen a few broncos sporting it. Have not seen them on a BRaptor yet. Just ordered the full kit, will post pics once I have them installed.
 

Iceman

Administrator
Staff member
Admin
Joined
Nov 2, 2021
Messages
734
Reaction score
204
Location
Gilbert, Az
Going with the short rack and side accessory panels from BadAss Tents. I’ve seen a few broncos sporting it. Have not seen them on a BRaptor yet. Just ordered the full kit, will post pics once I have them installed.
Will look awesome. How long did they say the shipping will take to get to you?
 

caljae1

New member
Joined
Jan 27, 2023
Messages
9
Reaction score
6
Location
Roseville, CA
It quotes 2-5 days when i was checking out. It’s coming out of Poway CA so I imagine that’s pretty accurate, once shipped. Website shows they have stock on hand but you know how that goes these days…
 

Iceman

Administrator
Staff member
Admin
Joined
Nov 2, 2021
Messages
734
Reaction score
204
Location
Gilbert, Az
It quotes 2-5 days when i was checking out. It’s coming out of Poway CA so I imagine that’s pretty accurate, once shipped. Website shows they have stock on hand but you know how that goes these days…
Nice. Hopefully no delays. Looking forward to seeing the mods
 

Rick

Active member
Joined
Mar 31, 2022
Messages
216
Reaction score
86
Location
Oxford, GA
Checked out a Bronco Raptor with 40s and painted flares this weekend. It just screwed up a fantastic vehicle. The flares would be destroyed with any serious off-road use. Drive ability suffered. Towing capacity lowered. Access suffered.
The only improvement is wow factor of looks. I’m not into looks at cost of function so I passed and will continue waiting on our order.
 

caljae1

New member
Joined
Jan 27, 2023
Messages
9
Reaction score
6
Location
Roseville, CA
It quotes 2-5 days when i was checking out. It’s coming out of Poway CA so I imagine that’s pretty accurate, once shipped. Website shows they have stock on hand but you know how that goes these days…
They shorted me the Rotopax side mounting plates. Will update when those arrive. Next up for install are the ProjectX lights and the RTR Jerry Can Holder…
D5962988-9488-4040-982E-437F73BBB285.jpeg
32613E15-B5C5-4F07-8866-3BB5544A2097.jpeg
 
Top